Soft Washing Nassau & Suffolk County, NY

Soft on Your Home. Hard on Dirt.

Low-pressure soft washing safely removes black streaks, algae, and mold—without damaging your shingles or siding. The result: a longer-lasting clean and extended life for both your roof and siding.

Soft Washing Services Long Island, NY

The Right Way to Clean Without the Risk

Soft washing isn’t just gentler than pressure washing. It’s smarter. Instead of blasting your roof or siding with high pressure that strips protective granules and forces water under shingles, we apply a low-pressure cleaning solution that kills algae, mold, and mildew at the source. The solution does the work, not the water. That means your surfaces get cleaner, stay cleaner longer, and don’t suffer the microscopic damage that leads to early replacement. It’s the method recommended by roofing manufacturers because it actually protects your investment instead of wearing it down. If you’ve been putting off cleaning your roof because you’re worried about damage, this is the answer. Safe for asphalt shingles, vinyl siding, stucco, wood, and just about any exterior surface on your Long Island home.

Roof Soft Washing Suffolk County

Benefits of Soft Washing

This isn’t about making your home look good for a few weeks—it’s about protecting your investment, preventing hidden damage, and keeping your home cleaner for longer.

Your roof stops losing granules and stays intact because we're not blasting it with pressure that strips away the protective layer.
Black streaks and algae don't come back as fast since we kill the growth at the root instead of just rinsing it off.
You avoid the cost of early siding or roof replacement by removing the organic growth that's literally feeding on your shingles right now.

Your home's curb appeal gets restored without the risk of water intrusion or siding & shingle damage that comes with pressure washing.
Your AC doesn't have to work as hard in summer because a clean roof reflects heat instead of absorbing it.
You stop breathing in mold spores and allergens that build up on exterior surfaces and work their way inside over time.

Ready to get started?

Soft Wash vs Pressure Washing Nassau & Suffolk County, NY

Why Pressure Washing Your Roof Is a Bad Idea

Most people don’t realize that pressure washing can quietly damage your siding and roof. High pressure can etch and oxidize siding, force water behind panels, and strip protective granules from shingles—shortening the life of both over time. Soft washing uses low pressure (about the same as a garden hose) and specialized solutions to break down algae, mold, and mildew at the source. The results last four to six times longer because the organisms are eliminated, not just rinsed away. Your siding and roof stay cleaner, protected, and built to last.

Soft Washing Process Long Island, NY

How Soft Washing Actually Works

We start with a full inspection of your roof or siding to identify any existing damage or areas that need special attention. Then we protect your landscaping, cover plants if needed, and wet down the surrounding area to create a buffer. The cleaning solution gets applied evenly across the surface using our low-pressure system. We let it sit for 10 to 20 minutes so it can penetrate deep into cracks, under shingles, and into the pores of your siding. That’s when it’s breaking down the algae, killing mold spores, and dissolving the biofilm that holds everything in place. After the solution has done its job, we rinse everything with low-pressure water from top to bottom. No streaking. No residue. No damage. Just a clean surface that’s going to stay that way for years instead of months. The whole process is designed to protect your materials while giving you results that actually last.

Soft Washing FAQs

Common Questions About Our Service

Is soft washing safe for my asphalt shingle roof in Long Island?

Yes. Soft washing is actually the only cleaning method recommended by the Asphalt Roofing Manufacturers Association. It uses low pressure—around 100 PSI, which is similar to a garden hose—combined with a specialized cleaning solution that kills algae and mold without damaging your shingles. Pressure washing, on the other hand, strips away the protective granules on your shingles and can force water underneath them, leading to leaks and premature failure. If your roof has black streaks from Gloeocapsa magma algae, which is extremely common in Long Island’s humid climate, soft washing removes it safely and keeps it from coming back as quickly. The method protects your roof instead of wearing it down.

How long do soft washing results last compared to pressure washing?

Soft washing typically lasts four to six times longer than pressure washing. That’s because we’re killing the algae, mold, and mildew at the root level, not just blasting it off the surface. When you pressure wash, you’re removing the visible growth but leaving behind spores and biofilm that allow it to come back within a year or two. Soft washing uses a cleaning solution that penetrates deep into the surface, breaks down the organisms at a molecular level, and sanitizes the area so it takes much longer for new growth to establish itself. Most Long Island homes benefit from soft washing every four to six years, depending on how much shade and moisture your property gets.

Will soft washing damage my landscaping or plants around the house?

No, not when it’s done correctly. We use biodegradable cleaning solutions that are safe for exterior use, and we take steps to protect your landscaping before we start. That includes wetting down all the plants, grass, and shrubs around your home to create a protective barrier, and covering any delicate plants if needed. After we finish, we rinse everything thoroughly to remove any residual solution. Our team has been doing this for years, and we know how to work around your property without causing damage. If you have specific concerns about certain plants or areas, just let us know during the estimate and we’ll plan accordingly.

What's the difference between soft washing and power washing for siding?

Soft washing uses low pressure and relies on the cleaning solution to do the work, while power washing uses high pressure to physically blast away dirt and grime. For siding—especially vinyl, stucco, or wood—soft washing is the safer and more effective option. High pressure can crack vinyl, force water behind siding panels, strip paint, and damage caulking or seals around windows and doors. Soft washing cleans just as thoroughly without any of those risks. The solution we use breaks down mold, mildew, algae, and dirt at the source, so your siding stays cleaner longer. It’s also gentler on the material itself, which means your siding lasts longer and you avoid costly repairs down the line.

How much does soft washing cost in Suffolk and Nassau County?

The cost depends on the size of your home, the condition of your roof or siding, and what surfaces you want cleaned. Most residential soft washing projects in Suffolk and Nassau County range from a few hundred to over a thousand dollars, but we give you an honest, upfront estimate based on your specific property. We’re not the cheapest option, and that’s intentional. You’re paying for licensed and insured professionals, professional-grade equipment, and a process that actually protects your investment instead of damaging it. We also offer discounts for new customers and military or first responder families. If you want a clear price with no surprises, just reach out and we’ll schedule a free estimate.

Can you soft wash my roof and siding at the same time?

Absolutely. In fact, that’s one of the most efficient ways to handle exterior cleaning. We can soft wash your roof, siding, patios, driveways, and any other exterior surfaces in one visit. That saves you time, and it means your whole property gets the same level of care and attention. A lot of homeowners use soft washing as the starting point and then discover they need minor masonry repairs or other maintenance work. Since we’re a one-stop solution for exterior services, we can handle it all without you having to coordinate multiple contractors. Just let us know what you’re looking to clean during the estimate, and we’ll put together a plan that makes sense for your home and your budget.